##Rexroth PVV21-1X/068-027RA15LUMB Vane pumpParts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Swash Plate Assy | 12,000 mm | 37,000 mm | 2.45 LB | -20 °C | ||||
| The Thrust Plate | 30 mm | 16.1250 in | 2 | 0.6 mm | ||||
| Cylinder Block | 9.4 kN | 197.973 | 11 mm | 190 kN | ||||
| Spacer | 15.5 Inch | 393.7 Millimeter | 22 Inch | 558.8 Millimeter | 89.88 | Assembly; Standard Precision; Components EE234157D (1) | 234220 (2); 15-1/2" Bore; 22" Outside Diameter; 4-11/16" Assembly Width; Double Row of Rollers | ||||
| Pump Right Rotating Group | UC206G2L4 | 3.0000 in | 25 kN | 0,3 mm | ||||
| Central Shaft | 2.2500 in | 3.0000 in | Center Pull | 2.79 | ||||
| Seal Kits | 1.1875 in | 4900 r/min | 60x75x42 | Non-Expansion | ||||
| Bearings | 1.4375 in | 37 | 11.2 kN | 8482.20.00.00 | ||||
| Plunger Sliding Boots | 142 mm | 68 mm | 40 | 60 | ||||
| Press Pin | 130 mm | 200 mm | 33 mm | 200 mm | ||||
| Back Plate | 4900 r/min | 16,000 rpm | 42 | 75 | ||||
| Swash Plate | 25 mm | 37 mm | 30 | 25 | ||||
| Cylinder Blocks | 0.07 kg | 0,3 mm | GR - Guiderol | 1.8 | ||||
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Weight (approx.):PCMW 426601.5 M; Maximum Torque:42x66x1.5; Case volume:42; Rotary stiffness:66; Flow:1,5; Nominal Resistance:42 mm; Voltage:66 mm; Drive Power:1,5 mm; Pressurefree Operation:54 mm; Load Pressure:4,25 mm; Maximum Permissible Speed (limit Speed):1 mm; Drive Speed:0,019 Kg; Pilot Pressure:240 kN; Maximum angular acceleration:Bearings; Maximum Axial Force At Standstill:0.0; Control Pressure Measurement:SKF; Determining Operating Characteristics:N/A; Maximum Permissible Pilot Pressure:0.019; Maximum rotational speed:B04264; Sequence Valve:66 mm; Displacement, geometric, per revolution:54 mm; Torque:1 mm; Maximum Volume Flow:240 kN; Power:510 kN; Rate Of Pressure Change:120 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:1900; Permissible sliding velocity v max.:2.5 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; Coefficient of friction µ min.:0.02; Mass thrust washer:0.019 kg; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Drive Power:PCMW 426601.5 M; Control Fluid Drain:42x66x1.5; Drive Speed:42; Sequence Valve:66; Nominal Resistance:1,5; Pilot Pressure:42 mm; Voltage:66 mm; Maximum Permissible Pilot Pressure:1,5 mm; Weight (approx.):54 mm; Maximum Volume Flow:4,25 mm; Flow:1 mm; Maximum rotational speed:0,019 Kg; Rate Of Pressure Change:240 kN; Maximum angular acceleration:Bearings; Load Pressure:0.0; Pressurefree Operation:SKF; Moment of inertia rotary group:N/A; Torque:0.019; Maximum Torque:B04264; Power:66 mm; Maximum Axial Force At Standstill:54 mm; Determining Operating Characteristics:1 mm; Maximum Permissible Speed (limit Speed):240 kN; Rotary stiffness:510 kN; Case volume:120 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:1900; Permissible sliding velocity v max.:2.5 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; Coefficient of friction µ min.:0.02; Mass thrust washer:0.019 kg; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Weight (approx.):PCMW 426601.5 M; Load Pressure:42x66x1.5; Nominal Resistance:42; Maximum Volume Flow:66; Pilot Pressure:1,5; Sequence Valve:42 mm; Maximum Axial Force At Standstill:66 mm; Displacement, geometric, per revolution:1,5 mm; Case volume:54 mm; Pressurefree Operation:4,25 mm; Rate Of Pressure Change:1 mm; Drive Speed:0,019 Kg; Voltage:240 kN; Drive Power:Bearings; Torque:0.0; Maximum angular acceleration:SKF; Maximum Permissible Speed (limit Speed):N/A; Maximum rotational speed:0.019; Control Pressure Measurement:B04264; Control Fluid Drain:66 mm; Power:54 mm; Moment of inertia rotary group:1 mm; Rotary stiffness:240 kN; Maximum Torque:510 kN; Determining Operating Characteristics:120 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:1900; Permissible sliding velocity v max.:2.5 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; Coefficient of friction µ min.:0.02; Mass thrust washer:0.019 kg; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Case volume:PCMW 426601.5 M; Maximum Permissible Pilot Pressure:42x66x1.5; Control Pressure Measurement:42; Maximum Volume Flow:66; Voltage:1,5; Drive Power:42 mm; Flow:66 mm; Nominal Resistance:1,5 mm; Load Pressure:54 mm; Rotary stiffness:4,25 mm; Maximum angular acceleration:1 mm; Maximum Permissible Speed (limit Speed):0,019 Kg; Pressurefree Operation:240 kN; Displacement, geometric, per revolution:Bearings; Weight (approx.):0.0; Maximum rotational speed:SKF; Torque:N/A; Moment of inertia rotary group:0.019; Pilot Pressure:B04264; Drive Speed:66 mm; Maximum Torque:54 mm; Maximum Axial Force At Standstill:1 mm; Sequence Valve:240 kN; Determining Operating Characteristics:510 kN; Power:120 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:1900; Permissible sliding velocity v max.:2.5 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; Coefficient of friction µ min.:0.02; Mass thrust washer:0.019 kg; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Maximum Axial Force At Standstill:PCMW 426601.5 M; Drive Power:42x66x1.5; Drive Speed:42; Maximum Volume Flow:66; Flow:1,5; Control Fluid Drain:42 mm; Load Pressure:66 mm; Case volume:1,5 mm; Rate Of Pressure Change:54 mm; Sequence Valve:4,25 mm; Control Pressure Measurement:1 mm; Maximum Permissible Speed (limit Speed):0,019 Kg; Determining Operating Characteristics:240 kN; Maximum Torque:Bearings; Nominal Resistance:0.0; Torque:SKF; Rotary stiffness:N/A; Weight (approx.):0.019; Maximum rotational speed:B04264; Maximum angular acceleration:66 mm; Moment of inertia rotary group:54 mm; Power:1 mm; Pilot Pressure:240 kN; Pressurefree Operation:510 kN; Displacement, geometric, per revolution:120 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:1900; Permissible sliding velocity v max.:2.5 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; Coefficient of friction µ min.:0.02; Mass thrust washer:0.019 kg; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum Permissible Speed (limit Speed):PCMW 426601.5 M; Maximum Axial Force At Standstill:42x66x1.5; Case volume:42; Weight (approx.):66; Maximum angular acceleration:1,5; Rate Of Pressure Change:42 mm; Sequence Valve:66 mm; Flow:1,5 mm; Voltage:54 mm; Power:4,25 mm; Maximum Permissible Pilot Pressure:1 mm; Pressurefree Operation:0,019 Kg; Load Pressure:240 kN; Determining Operating Characteristics:Bearings; Drive Speed:0.0; Control Pressure Measurement:SKF; Moment of inertia rotary group:N/A; Drive Power:0.019; Rotary stiffness:B04264; Maximum rotational speed:66 mm; Displacement, geometric, per revolution:54 mm; Maximum Volume Flow:1 mm; Pilot Pressure:240 kN; Torque:510 kN; Control Fluid Drain:120 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:1900; Permissible sliding velocity v max.:2.5 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; Coefficient of friction µ min.:0.02; Mass thrust washer:0.019 kg; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Maximum Axial Force At Standstill:PCMW 426601.5 M; Drive Speed:42x66x1.5; Drive Power:42; Displacement, geometric, per revolution:66; Rate Of Pressure Change:1,5; Case volume:42 mm; Determining Operating Characteristics:66 mm; Pressurefree Operation:1,5 mm; Load Pressure:54 mm; Nominal Resistance:4,25 mm; Weight (approx.):1 mm; Pilot Pressure:0,019 Kg; Torque:240 kN; Rotary stiffness:Bearings; Flow:0.0; Control Fluid Drain:SKF; Maximum Volume Flow:N/A; Maximum Torque:0.019; Moment of inertia rotary group:B04264; Control Pressure Measurement:66 mm; Voltage:54 mm; Maximum Permissible Speed (limit Speed):1 mm; Maximum rotational speed:240 kN; Sequence Valve:510 kN; Maximum angular acceleration:120 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:1900; Permissible sliding velocity v max.:2.5 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; Coefficient of friction µ min.:0.02; Mass thrust washer:0.019 kg; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Drive Speed:PCMW 426601.5 M; Control Fluid Drain:42x66x1.5; Torque:42; Maximum Permissible Speed (limit Speed):66; Drive Power:1,5; Maximum Torque:42 mm; Moment of inertia rotary group:66 mm; Rotary stiffness:1,5 mm; Sequence Valve:54 mm; Maximum rotational speed:4,25 mm; Weight (approx.):1 mm; Flow:0,019 Kg; Maximum angular acceleration:240 kN; Case volume:Bearings; Maximum Volume Flow:0.0; Nominal Resistance:SKF; Determining Operating Characteristics:N/A; Power:0.019; Load Pressure:B04264; Rate Of Pressure Change:66 mm; Pilot Pressure:54 mm; Control Pressure Measurement:1 mm; Maximum Permissible Pilot Pressure:240 kN; Displacement, geometric, per revolution:510 kN; Maximum Axial Force At Standstill:120 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:1900; Permissible sliding velocity v max.:2.5 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; Coefficient of friction µ min.:0.02; Mass thrust washer:0.019 kg; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Control Fluid Drain:PCMW 426601.5 M; Sequence Valve:42x66x1.5; Moment of inertia rotary group:42; Flow:66; Maximum Volume Flow:1,5; Maximum Permissible Speed (limit Speed):42 mm; Maximum Permissible Pilot Pressure:66 mm; Drive Power:1,5 mm; Power:54 mm; Weight (approx.):4,25 mm; Maximum rotational speed:1 mm; Control Pressure Measurement:0,019 Kg; Pressurefree Operation:240 kN; Displacement, geometric, per revolution:Bearings; Drive Speed:0.0; Rotary stiffness:SKF; Maximum angular acceleration:N/A; Pilot Pressure:0.019; Voltage:B04264; Nominal Resistance:66 mm; Case volume:54 mm; Determining Operating Characteristics:1 mm; Rate Of Pressure Change:240 kN; Maximum Torque:510 kN; Torque:120 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:1900; Permissible sliding velocity v max.:2.5 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; Coefficient of friction µ min.:0.02; Mass thrust washer:0.019 kg; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Voltage:PCMW 426601.5 M; Drive Power:42x66x1.5; Maximum Permissible Pilot Pressure:42; Case volume:66; Determining Operating Characteristics:1,5; Pilot Pressure:42 mm; Maximum angular acceleration:66 mm; Displacement, geometric, per revolution:1,5 mm; Maximum Volume Flow:54 mm; Power:4,25 mm; Flow:1 mm; Sequence Valve:0,019 Kg; Moment of inertia rotary group:240 kN; Nominal Resistance:Bearings; Control Fluid Drain:0.0; Maximum Permissible Speed (limit Speed):SKF; Maximum Axial Force At Standstill:N/A; Maximum Torque:0.019; Rotary stiffness:B04264; Pressurefree Operation:66 mm; Drive Speed:54 mm; Torque:1 mm; Control Pressure Measurement:240 kN; Rate Of Pressure Change:510 kN; Weight (approx.):120 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:1900; Permissible sliding velocity v max.:2.5 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; Coefficient of friction µ min.:0.02; Mass thrust washer:0.019 kg; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Rotary stiffness:PCMW 426601.5 M; Displacement, geometric, per revolution:42x66x1.5; Voltage:42; Power:66; Weight (approx.):1,5; Maximum Permissible Speed (limit Speed):42 mm; Nominal Resistance:66 mm; Maximum rotational speed:1,5 mm; Control Pressure Measurement:54 mm; Maximum Volume Flow:4,25 mm; Drive Power:1 mm; Sequence Valve:0,019 Kg; Determining Operating Characteristics:240 kN; Drive Speed:Bearings; Pressurefree Operation:0.0; Torque:SKF; Control Fluid Drain:N/A; Maximum Permissible Pilot Pressure:0.019; Case volume:B04264; Pilot Pressure:66 mm; Rate Of Pressure Change:54 mm; Load Pressure:1 mm; Maximum Torque:240 kN; Flow:510 kN; Maximum Axial Force At Standstill:120 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:1900; Permissible sliding velocity v max.:2.5 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; Coefficient of friction µ min.:0.02; Mass thrust washer:0.019 kg; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Maximum angular acceleration:PCMW 426601.5 M; Sequence Valve:42x66x1.5; Pressurefree Operation:42; Voltage:66; Power:1,5; Moment of inertia rotary group:42 mm; Flow:66 mm; Weight (approx.):1,5 mm; Control Pressure Measurement:54 mm; Maximum Axial Force At Standstill:4,25 mm; Torque:1 mm; Rate Of Pressure Change:0,019 Kg; Drive Speed:240 kN; Maximum Permissible Speed (limit Speed):Bearings; Maximum Permissible Pilot Pressure:0.0; Rotary stiffness:SKF; Maximum rotational speed:N/A; Maximum Torque:0.019; Drive Power:B04264; Pilot Pressure:66 mm; Case volume:54 mm; Nominal Resistance:1 mm; Load Pressure:240 kN; Displacement, geometric, per revolution:510 kN; Maximum Volume Flow:120 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:1900; Permissible sliding velocity v max.:2.5 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; Coefficient of friction µ min.:0.02; Mass thrust washer:0.019 kg; |
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Rexroth PVV21-1X/068-027RA15LUMB Vane pump Video