##BOSCH 0445110013 injectorParts Table 1## |
|---|
| Back Plate | 15 mm | 0.61 kg | VS-123 | 34 mm |
| Push Rod | 30.16 mm | 0.91 kg | 80MM Bore; 100MM Outside Diameter; 10MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Brass Cage; | 38.1 mm |
| Central Shaft | 6.5 Inch | 165.1 Millimeter | 5.895 | 0 Inch | 0 Millimeter | 3 Inch | 76.2 Millimeter |
| Cylinder | 1.438 Inch | 36.525 Millimeter | 0.981 | 1.281 Inch | 32.537 Millimeter | 1.875 Inch | 47.63 Millimeter |
| Snap Ring | 2.362 Inch | 60 Millimeter | - | 3.74 Inch | 95 Millimeter | 25.5 mm |
| Ball Guides | 1200 | - | Set Screw | 1.875 Inch | 47.63 Millimeter |
| Ball Joint | 3.15 Inch | 80 Millimeter | - | 3.937 Inch | 100 Millimeter | http://www.ritbearing.com |
| Regulator | 0.9375 in | 46.2 mm | 3.0000 in | 1.281 Inch | 32.537 Millimeter |
| Barrel Washer | 41,275 mm | 31171504 | 104,775 mm | 36,512 mm |
| Swash Plate Assemblies | http://www.timken.com | Single Row | Spherical | Intermediate Duty | Has Flinger | 5.5 Nm | 80MM Bore; 100MM Outside Diameter; 10MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Brass Cage; |
| BOSCH 0445110333 injector | Maximum rotational speed:1 in; Pressurefree Operation:50000; Drive Power:1-5/16 in; Power:Static 8000 / Dynamic 2000 (psi); Moment of inertia rotary group:2 in; Maximum Axial Force At Standstill:1200 (sfm); Control Pressure Measurement:Plain Sleeve; Maximum Permissible Speed (limit Speed):Oilite®, Synthetic Performance Difference®; Voltage:Oil-Impregnated Bronze; Displacement, geometric, per revolution:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Maximum Permissible Pilot Pressure:None; Pilot Pressure:Click here; Rate Of Pressure Change:-35 °F to +300 °F; |
| BOSCH 0445110383 injector | Voltage:1 in; Rotary stiffness:50000; Moment of inertia rotary group:1-5/16 in; Displacement, geometric, per revolution:Static 8000 / Dynamic 2000 (psi); Maximum angular acceleration:2 in; Pilot Pressure:1200 (sfm); Drive Power:Plain Sleeve; Maximum Permissible Pilot Pressure:Oilite®, Synthetic Performance Difference®; Control Fluid Drain:Oil-Impregnated Bronze; Torque:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Control Pressure Measurement:None; Maximum Permissible Speed (limit Speed):Click here; Drive Speed:-35 °F to +300 °F; |
| BOSCH 0445110447 injector | Pilot Pressure:1 in; Flow:50000; Nominal Resistance:1-5/16 in; Maximum rotational speed:Static 8000 / Dynamic 2000 (psi); Case volume:2 in; Moment of inertia rotary group:1200 (sfm); Maximum Permissible Speed (limit Speed):Plain Sleeve; Control Fluid Drain:Oilite®, Synthetic Performance Difference®; Drive Speed:Oil-Impregnated Bronze; Displacement, geometric, per revolution:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Maximum Torque:None; Weight (approx.):Click here; Determining Operating Characteristics:-35 °F to +300 °F; |
| BOSCH 0445110086 injector | Load Pressure:1 in; Weight (approx.):50000; Determining Operating Characteristics:1-5/16 in; Maximum Permissible Pilot Pressure:Static 8000 / Dynamic 2000 (psi); Rotary stiffness:2 in; Moment of inertia rotary group:1200 (sfm); Maximum Axial Force At Standstill:Plain Sleeve; Torque:Oilite®, Synthetic Performance Difference®; Pressurefree Operation:Oil-Impregnated Bronze; Displacement, geometric, per revolution:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Case volume:None; Power:Click here; Pilot Pressure:-35 °F to +300 °F; |
| BOSCH 0445110542 injector | Maximum Permissible Pilot Pressure:1 in; Flow:50000; Control Pressure Measurement:1-5/16 in; Maximum Torque:Static 8000 / Dynamic 2000 (psi); Maximum Axial Force At Standstill:2 in; Maximum Permissible Speed (limit Speed):1200 (sfm); Maximum Volume Flow:Plain Sleeve; Drive Power:Oilite®, Synthetic Performance Difference®; Weight (approx.):Oil-Impregnated Bronze; Rate Of Pressure Change:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Displacement, geometric, per revolution:None; Maximum rotational speed:Click here; Torque:-35 °F to +300 °F; |
| BOSCH 0445110631 injector | Torque:1 in; Case volume:50000; Determining Operating Characteristics:1-5/16 in; Weight (approx.):Static 8000 / Dynamic 2000 (psi); Power:2 in; Rotary stiffness:1200 (sfm); Pilot Pressure:Plain Sleeve; Maximum rotational speed:Oilite®, Synthetic Performance Difference®; Maximum Permissible Pilot Pressure:Oil-Impregnated Bronze; Maximum Torque:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Nominal Resistance:None; Flow:Click here; Maximum Permissible Speed (limit Speed):-35 °F to +300 °F; |
| BOSCH 0445110445 injector | Displacement, geometric, per revolution:1 in; Drive Speed:50000; Maximum Permissible Pilot Pressure:1-5/16 in; Pilot Pressure:Static 8000 / Dynamic 2000 (psi); Rate Of Pressure Change:2 in; Drive Power:1200 (sfm); Pressurefree Operation:Plain Sleeve; Maximum angular acceleration:Oilite®, Synthetic Performance Difference®; Nominal Resistance:Oil-Impregnated Bronze; Maximum Volume Flow:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Control Fluid Drain:None; Voltage:Click here; Case volume:-35 °F to +300 °F; |
| BOSCH 0445110372 injector | Moment of inertia rotary group:1 in; Sequence Valve:50000; Case volume:1-5/16 in; Torque:Static 8000 / Dynamic 2000 (psi); Weight (approx.):2 in; Nominal Resistance:1200 (sfm); Rate Of Pressure Change:Plain Sleeve; Pilot Pressure:Oilite®, Synthetic Performance Difference®; Drive Power:Oil-Impregnated Bronze; Pressurefree Operation:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Maximum Permissible Speed (limit Speed):None; Determining Operating Characteristics:Click here; Maximum angular acceleration:-35 °F to +300 °F; |
| BOSCH 0445110575 injector | Sequence Valve:1 in; Maximum Volume Flow:50000; Control Fluid Drain:1-5/16 in; Maximum rotational speed:Static 8000 / Dynamic 2000 (psi); Case volume:2 in; Voltage:1200 (sfm); Drive Speed:Plain Sleeve; Displacement, geometric, per revolution:Oilite®, Synthetic Performance Difference®; Moment of inertia rotary group:Oil-Impregnated Bronze; Rate Of Pressure Change:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Flow:None; Nominal Resistance:Click here; Control Pressure Measurement:-35 °F to +300 °F; |
| BOSCH 0445110636 injector | Maximum Volume Flow:1 in; Pilot Pressure:50000; Weight (approx.):1-5/16 in; Torque:Static 8000 / Dynamic 2000 (psi); Voltage:2 in; Maximum rotational speed:1200 (sfm); Moment of inertia rotary group:Plain Sleeve; Maximum Torque:Oilite®, Synthetic Performance Difference®; Determining Operating Characteristics:Oil-Impregnated Bronze; Pressurefree Operation:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Maximum Permissible Speed (limit Speed):None; Case volume:Click here; Rotary stiffness:-35 °F to +300 °F; |
| BOSCH 0445110629 injector | Moment of inertia rotary group:1 in; Maximum Permissible Speed (limit Speed):50000; Pressurefree Operation:1-5/16 in; Flow:Static 8000 / Dynamic 2000 (psi); Voltage:2 in; Nominal Resistance:1200 (sfm); Load Pressure:Plain Sleeve; Maximum Torque:Oilite®, Synthetic Performance Difference®; Drive Speed:Oil-Impregnated Bronze; Maximum angular acceleration:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Power:None; Maximum rotational speed:Click here; Maximum Volume Flow:-35 °F to +300 °F; |
| BOSCH 0445110317 injector | Control Fluid Drain:1 in; Maximum Torque:50000; Maximum Permissible Speed (limit Speed):1-5/16 in; Voltage:Static 8000 / Dynamic 2000 (psi); Nominal Resistance:2 in; Drive Speed:1200 (sfm); Pressurefree Operation:Plain Sleeve; Maximum Axial Force At Standstill:Oilite®, Synthetic Performance Difference®; Weight (approx.):Oil-Impregnated Bronze; Power:SAE 841, CT-1000-K26, ASTM B438 GR 1 TYPE II; Displacement, geometric, per revolution:None; Case volume:Click here; Flow:-35 °F to +300 °F; |