| Maximum angular acceleration | 7019 ACD/P4AH1 |
| Power | 145x95x24 |
| Rate Of Pressure Change | 145 |
| Pilot Pressure | 95 |
| Determining Operating Characteristics | 24 |
| Case volume | 95 mm |
| Drive Power | 145 mm |
| Rotary stiffness | 24 mm |
| Pressurefree Operation | 110.4 mm |
| Displacement, geometric, per revolution | 110.4 mm |
| Maximum Volume Flow | 129.6 mm |
| Control Fluid Drain | 0.5 mm |
| Maximum Permissible Speed (limit Speed) | 6.41 mm |
| Load Pressure | 1.5 mm |
| Maximum rotational speed | 1 mm |
| Voltage | 40.1 mm |
| Maximum Torque | 102 mm |
| Maximum Permissible Pilot Pressure | 102 mm |
| Maximum Axial Force At Standstill | 138 mm |
| Nominal Resistance | 141 mm |
| Drive Speed | 1.5 mm |
| Control Pressure Measurement | 1 mm |
| Torque | 113.7 mm |
| Sequence Valve | 76.1 kN |
| Weight (approx.) | 76.5 kN |
| Moment of inertia rotary group | 2.9 kN |
| Flow | 8000 r/min |
| Limiting speed for oil lubrication | 13000 mm/min |
| Ball - Dw | 15.875 mm |
| Ball - z | 21 |
| Gref | 15.6 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 480 N |
| Preload class B - GB | 960 N |
| Preload class C - GC | 1920 N |
| Preload class D - GD | 3840 N |
| Calculation factor - f | 1.15 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.02 |
| Calculation factor - f2C | 1.05 |
| Calculation factor - f2D | 1.08 |
| Calculation factor - fHC | 1 |
| Preload class A | 258 N/micron |
| Preload class B | 337 N/micron |
| Preload class C | 448 N/micron |
| Preload class D | 607 N/micron |
| d1 | 110.4 mm |
| d2 | 110.4 mm |
| D1 | 129.6 mm |
| C1 | 6.41 mm |
| r1,2 min. | 1.5 mm |
| r3,4 min. | 1 mm |
| da min. | 102 mm |
| db min. | 102 mm |
| Da max. | 138 mm |
| Db max. | 141 mm |
| ra max. | 1.5 mm |
| rb max. | 1 mm |
| dn | 113.7 mm |
| Basic dynamic load rating C | 76.1 kN |
| Basic static load rating C0 | 76.5 kN |
| Fatigue load limit Pu | 2.9 kN |
| Attainable speed for grease lubrication | 8000 r/min |
| Attainable speed for oil-air lubrication | 13000 r/min |
| Ball diameter Dw | 15.875 mm |
| Number of balls z | 21 |
| Reference grease quantity Gref | 15.6 cm³ |
| Preload class A GA | 480 N |
| Static axial stiffness, preload class A | 258 N/µm |
| Preload class B GB | 960 N |
| Static axial stiffness, preload class B | 337 N/µm |
| Preload class C GC | 1920 N |
| Static axial stiffness, preload class C | 448 N/µm |
| Preload class D GD | 3840 N |
| Static axial stiffness, preload class D | 607 N/µm |
| Calculation factor f | 1.15 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.02 |
| Calculation factor f2C | 1.05 |
| Calculation factor f2D | 1.08 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 1.21 kg |
